Aircraft Spruce and Specialty Co Forum Index Aircraft Spruce and Specialty Co
The Pilots Portal to the World
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Need SA900 Parts

 
Post new topic   Reply to topic    Aircraft Spruce and Specialty Co Forum Index -> Starduster and Acroduster
View previous topic :: View next topic  
Author Message
Daphne53932



Joined: 16 Mar 2017
Posts: 3

PostPosted: Fri Mar 17, 2017 5:13 pm    Post subject: Need SA900 Parts Reply with quote

EAA Chapter 36 in Hagerstown, MD is building an SA900 that we inherited
from a builder in PA who started it.
We have the fuselage completed with the controls in and on the gear with a Maule tailwheel, Cleveland 6:00 x 6 wheels and brakes and Gerdes Master cylinders from a Cessna 150.
We have 3 wings built and the spars, ribs and metal parts fabricated and ready to assemble the fourth. We have the center section parts fabricated also but not yet assembled. We are just completing the tail feathers now.
We will need the turtle back, fuel tanks and a nose bowl soon.
Any help in locating these parts will be greatly appreciated.
We've tried Aircraft Spruce without success.
Joe Boyle
301-797-1875
joeboyle1@verizon.net
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Aircraft Spruce and Specialty Co Forum Index -> Starduster and Acroduster All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by Aircraft Spruce Worldwide Distributor of Certified and Homebuilt Aircraft Supplies