Aircraft Spruce and Specialty Co Forum Index Aircraft Spruce and Specialty Co
The Pilots Portal to the World
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

SD1 Inspection plate on leading edge

 
Post new topic   Reply to topic    Aircraft Spruce and Specialty Co Forum Index -> Starduster and Acroduster
View previous topic :: View next topic  
Author Message
Steve H



Joined: 21 Aug 2010
Posts: 90
Location: OK/AK

PostPosted: Sat Dec 07, 2013 6:22 am    Post subject: SD1 Inspection plate on leading edge Reply with quote

Ok you SD1 owners, does your plane have an inspection plate on the lower leading edge right next to the inboard end of one of the top wings? This would be to install/inspect the bolts that go through the wing to wing joining plates.

The "other" top wing would have the plates and bolts installed prior to covering, so probably wouldn't have an inspection plate.

Thanks.

Steve H
_________________
SA100 rebuild in progress
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Aircraft Spruce and Specialty Co Forum Index -> Starduster and Acroduster All times are GMT - 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by Aircraft Spruce Worldwide Distributor of Certified and Homebuilt Aircraft Supplies